Model: IC-F24 - DISCONTINUED

[Show More]

construction is resistant to shock and vibration. The dual rail guide design securely locks the battery pack to the radio. Wide range frequency coverage, Li-Ion battery pack, loud and clear audio, built-in signaling and option unit connector combined with Icom grade electrical performance, the Icom IC-F24 Portable Radio series will easily exceed your expectations. Tough and reliable construction The Icom IC-F24 Portable Radio series is built around an aluminum die-cast chassis and covered with tough polycarbonate casing. This radio is built to last. Its dual slide rail securely locks the battery to the radio. The battery terminal is covered with a non-corrosive rubber packing. The belt clip is clamped between the radio and the battery, making it nearly impossible to knock loose. Icom Icom IC-F24 Portable Radio features Simple operation Having only 3 buttons, volume and channel knobs, the Icom IC-F24 Portable Radio series does not require special training to use. Positive button action for sure operation even when wearing gloves, allows you to get down to the business of communicating without fuss. Wide frequency coverage The Icom IC-F24 Portable Radio series covers a wide frequency range with one version (136–174, 400–470, 450–512 (520) MHz). Wide and narrow channel spacing (25, 12.5kHz) is programmable per channel. Icom Icom IC-F24 Portable Radio provides Lithium-Ion battery standard The Icom IC-F24 Portable Radio series comes with the BP-231 Li-Ion battery pack as standard. Li-Ion batteries have virtually no memory issues and allows you flexible charging. In addition, the optional BP-232 provides a high capacity 2000mAh for longer operating time. Optional board The Icom IC-F24 Portable Radio series has an expansion socket for adding an optional board. Voice scrambler, man down and DTMF decoder features are available, depending on the installed board. Most popular signalings built-in. Icom Icom IC-F24 Portable Radio has Multiple 2-Tone, Multiple 5-Tone Up to 10 2-Tone/8 5-Tone codes can be decoded on a channel. When a matched tone is received, the following items are programmable for each code. Use the built-in 2-Tone, 5-Tone, CTCSS and DTCS capabilities as standard to set up your own talk groups and quiet stand-by when others are talking. Beep sound Answer back Stun LED blink Scan Icom Icom IC-F24 Portable Radio General Specifications Frequency coverage IC-F14/F14S IC-F24/F24S     136 – 174 MHz (U.S.A. and General) 400 – 470 MHz (U.S.A. and General) 450 – 512 MHz (U.S.A.) 450 – 520 MHz (General) Number of channels 16 (IC-F14, IC-F24) 4 (Max.,IC-F14S, IC-F24S) Channel spacing 12.5KHz/25 kHz PLL channel step 2.5 kHz, 3.125 kHz (VHF) 5KHz, 6.25KHz (UHF) Power supply requirement 7.2V DC Current drain Transmit   Receive (at 7.2V DC; approx.) High 1.5A Low (1W) 0.7A stand-by 70mA rated output 300mA Antenna impedance 50Ω Usable temperature range –30°C to +60°C –22°F to +140°F Dimensions (with BP-231) (projections are not included) 53 (W) ×120 (H) ×38 (D) mm 2 3 ⁄ 32 (W) ×4 23 ⁄ 32 (H)×1 1 ⁄ 2 (D) in Weight (approx. with BP-231) 260g; 9.2oz Icom Icom IC-F24 Portable Radio Transmitter Output power 5W (VHF), 4W (UHF) Max. frequency deviation ±5.0/2.5 kHz (Wide/narrow) Frequency error ±2.5ppm Spurious emissions 80dB typ. Adjacent channel power VHF UHF    80/70dB typ. (Wide/narrow) 75/68dB typ. (Wide/narrow) FM Hum and Noise 46dB typ. (Wide) 40dB typ. (Narrow) Audio harmonic distortion 3% typ. (AF 1kHz, 40% deviation) Modulation limiting 60–100% of max. deviation External microphone connector 3-conductor 2.5 (d) mm ( 1 ⁄ 10 ″)/2.2kΩ Icom Icom IC-F24 Portable Radio Receiver Sensitivity 0.25μV typ. (at 12dB SINAD) Squelch sensitivity 0.25μV typ. (at threshold) Adjacent channel selectivity 75dB typ. (Wide) 65dB typ. (Narrow) Spurious response 70dB Intermodulation 74dB typ. Hum and noise ratio 50dB typ. (Wide) 45dB typ. (Narrow) Audio output power 500mW typ. (at 5% distortion with an 8Ω load) External speaker connector 2-conductor 3.5 (d) mm ( 1 ⁄ 8 ″)/8Ω Applicable U.S. Military Specifications Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards. Standard MIL 810C MIL 810D MIL 810E MIL 810F Method Proc. Method Proc. Method Proc. Method Proc. Low Pressure 500.1 I 500.2 I, II 500.3 I, II 500.4 I, II High Temp. 501.1 I 501.2 I, II 501.3 I ,II 501.4 I, II Low Temp. 502.1 I 502.2 I, II 502.3 I, II 502.4-3 I, II Temp. Shock 503.1 I 503.2 I 503.3 I 503.4 I Solar Radiation 505.1 I 505.2 I 505.3 I 505.4 I Rain 506.1 II 506.2 II 506.3 II 506.4 III Humidity 507.1 I, II 507.2 II, III 507.3 II, III 507.4 — Salt Fog 509.1 I 509.2 I 509.3 I 509.4 — Dust 510.1 I 510.2 I 510.3 I 510.4 I Vibration 514.2 VII, X 514.3 I 514.4 I 514.4 I Shock 516.2 I, II, IV 516.3 I, IV 516.4 I, IV 516.5 I, IV Measurements made in accordance with EIA/TIA-603. All stated specifications are subject to change without notice or obligation.