ICOM IC-FR4000 Series Repeater , Base Station Bridging the gap between bands 50 Watt continuous full duty cycle operation ICOM FR4000 UHF Repeater-Base System, 450 - 480 MHz, 50 Watts, 12.5/25 kHz Channel Spacing, 32 Memory Channels, CW ID Capability, 100% Duty Cycle, Temperature Alert, 110 Volts AC This repeater looks as good as it performs. A rugged heatsink, large cooling fans and a high performance power module provide the repeater with a stable 50W at full...
[Show More]
duty cycle operation. Automatic battery backup system A built-in backup system supports automatic switching to an external power supply (13.6V DC) if the AC power supply fails. Multiple CTCSS & DTCS tone memories with multiple memory channels Up to 16 CTCSS/DTCS tones (TX/RX tones respectively) can be programmed in a channel. This feature allows you to share a channel with multiple user groups. You can also give priority/exclusive use to a specified group simply by programming different tones to another memory channel. Ideal for many different applications. Built-in 2-Tone, 5-Tone, DTMF encoder & decoder Multiple signaling systems are equipped as standard. These systems are fully compatible with Icom F-series radios. Internal space for duplexer and isolator The repeater has an internal space to install a duplexer and isolator * . The controls of the duplexer are accessible from the front of the repeater without disassembly. Faster and easier maintenance and adjustment is possible. * Ask your psicompany.com for details about available duplexers and isolators. Telephone interconnect capability DTMF remote control capability You can control the repeater from a remote location over the air or over a phone line with DTMF. Optional wall mount bracket, MB-77 and 19 inch rack mount bracket, MB-78 19-inch rack mount, MB-78 Installation on a wall with the MB-77 Additional Features Master/Slave backup operation by connecting two repeaters Self check function checks for internal errors and alerts with a beep sound or with a phone call Accessory connector (D-sub 25-pin) on the rear panel for trunking controller including LTR, PassPort, SmarTrunkΙΙ and MPT1327 Compatible with VEGA tone remote control system 5-Tone relay function Optional Voice Scrambler UT-109 or UT-110 CW ID transmitter (DTMF or 5-Tone also selectable) Password and kill/stun function for security 16-digit alphanumeric display convenient for base station operation A programmable button gives access to a customized function All trademarks are the properties of their respective holders.
