Model: JSB-196GM-A2 - DISCONTINUED

[Show More]

meets the latest regulations for maritime MF/HF communications by connecting the NCT-196 DSC terminal with a built-in watchkeeping receiver. The radiotelephone system consisting of the JSB-196GM, covering the frequency range of 1.6 to 27.5MHz and the NCT-196 DSC terminal with internal DSC watchkeeping receiver conform to the applicable regulations, including the IMO performance and national standard. JRC JSB-196GM MF/HF Radiotelephone Provides Digital Signal Processing (DSP) The JRC JSB-196GM radiotelephone uses a 32 bit floating point for digital signal processing after the IF stage. The DSP technology improves a wide range of functions, including noise reduction and various types of interference rejection, ensuring enhanced performance. JRC JSB-196GM MF/HF Radiotelephone Makes For Easy Operation The JRC JSB-196GM is designed for user-friendly operation, using a single, large control dial button for frequency channel selection, mode setting and high/low power transmit switching. The NCT-196 integrates the DSC modem and watchkeeping receiver, enabling convenient operation that also fully meets the GMDSS requirements. JRC JSB-196GM MF/HF Radiotelephone Allows Easy Installation The components are very compact designed, allowing for simple onboard installation, even on smaller ships. The GMDSS based system consists of the JRC JSB-196GM MF/HF radiotelephone, the NCT-196 DSC terminal and a DC-DC converter. The main unit of the JSB-196GM and the NCT-196 can be integrated as a stacked system, and can be installed easily on the bridge.   ♦ JRC JSB-196GM MF/HF Radiotelephone General Information The radiotelephone system consisting of the JSB-196GM that covers the frequency range of 1.6 to 27.5MHz and the NCT-196 DSV terminal with an internal DSC watchkeeping receiver conforms to the applicable regulations including the IMO performance standard and the national standard.   ♦ JRC JSB-196GM MF/HF Radiotelephone FEATURES   • Simple installation on small ship   Each equipment if of very compact design for simple installation on small ship. The GMDSS-based system consists of the JSB-196GM MF/HF Radiotelephone, the NCT-196 DSC Terminal and a DC-DC converter. The main unit of the JSB-196GM and the NCT-196 can be integrated as a stacked system and installed in a easy-to-operate place on the bridge.     • High expandability   The JSB-196GM can provide the HF E-mail communication capability by connecting a dedicated modem and a general-purpose personal computer.   • Easy operation   The JSB-196GM is designed for user-friendly operation using a single large control dial for frequency channel selection, mode setting and high/low transmit power switching. The NCT-196 integrates the DSC modem and the watchkeeping receiver in it, enabling operations to fully meet the GMDSS requirements.     • Digital signal processing(DSP)   The JSB-196GM radiotelephone uses 32-bit floating point DSP for digital signal processing in and after the IF stage. The DSP technology improves a number of functions including noise reduction and various types of interference rejection, ensuring enhanced performance. ♦ JRC JSB-196GM MF/HF Radiotelephone TECHNICAL FEATURES General Frequency range Transmit: 1.6 to 27.5MHz Receiver: 0.1 to 29.9999MHz Frequency increments 100Hz Frequency tolerance ±10Hz or better User definable channels 200ch(20ch 10Groups) Emissions mode J3E A1A, F1B:920 A1A:519 and H3E(Reception only) Preset ITU channels 1722ch(SSB:283, F1B:920, A1A:519) Scanning channel 20 user defined channels Communication mode Simplex and semi-duplex Antenna impedance 50ohms Operating temperature -15degC to +55degC Power requirements DC13.6V±10%, (12.3VDC to 15.0VDC), negative-grounded. Tx:40A max Rx:2A max (Operable between 10.2VDC and 16.2VDC) Compass safe distance 1.5m Dimensions and mass 250mm(W) × 100mm(H) × 260mm(D), Approx. 7.4kg TRANSMITTER Output power 100Wpp(1.6 to 4MHz) 150Wpp(4 to 27.5MHz) Occupied bandwidth J3E: 3kHz or better F1B, A1A: 0.5kHz or less Carrier suppression 40dB or better Spurious suppression 43dB or better AF frequency response 350 to 2700Hz(60dB bandwidth) Microphone input 600ohms Line input 600ohms, 0dBm(balanced) RECEIVER Receiving system Triple superheterodyne Intermediate frequencies 70.455MHzA455MHzA20.217MHz   Sensitivity(SINAD 20dB) J3E: 6.3uV or better (1.6 to 4MHz) 3.5uV or better (4 to 27.5MHz) F1B: 1.8uV or better (1.6 to 4MHz) 1.0uVor better (4 to 27.5MHz) Selectivity J3E: 6dB bandwidth 2.4 to 3kHz 66dB bandwidth with in ±2.1kHz F1B: 6dB bandwidth 270 ∼ 300Hz 60dB bandwidth with in ±550Hz Spurious response 60dB or better Clarifier range ±200Hz in 1Hz steps AF output 5.0W max. 1W rated Line output 600ohms, 0dBm(balanced) NFC-196 ANTENNA TUNER Frequency range 1.6 to 30MHz Power capability 200Wpp SWR after tuning 2 : 1 Turning time Automatic tuning: typical 3sec Preset tuning: typical 0.5sec Operating temperature -30degC to +60degC Power requirement 10.2VDC to 16.2VDC negative-grounded 1.5A(max) Dimensions and mass 230mm(W) × 380mm(H) × 90mm(D), Approx. 3.3kg NCT-196 DSV TERMINAL Protocol ITU-RM.493-7, M.541-6 and M.1082 Modulation rate 100 baud Modulation accuracy Within ±30ppm Output frequency 1700Hz ±85Hz Frequency tolerance ±0.5Hz or better Output level -20dBm to +10dBm Operating temperature -15degC to +55degC Power requirement 10.2VDC to 16.2VDC, negative-grounded, 3A max Dimensions and mass 250mm(W) × 100mm(H) × 260mm(D), Approx. 4.8kg WATCH KEEPING RECEIVER Receiving system Double superheterodyne Receiving frequencies 2187.5kHz, 4207.5kHz, 6312.0kHz, 8414.5kHz, 12577.0kHz, 16804.5kHz Sensitivity Character error rate 1% at receiver input voltage of 1uV Antenna impedance 50ohms ♦ JRC JSB-196GM MF/HF Radiotelephone STANDARD COMPONENTS Component Model Q'ty Remarks MF/HF Radiotelephone JSB-196GM 1   Included Accessories       Hand Set NQW-213 1   Power Cable 7ZCJD0043A 1 L=1m Accessory Parts JSB-196 ACCESS 1 Spare fuse, terminal, etc Instruction Manual 7ZPJD0124 1 English Component Model Q'ty Remarks Antenna Tuner NFC-196 1   ATU Control Cable 7ZCJD0044A 1 L=5m ATU RF Cable 7ZCJD0045 1 L=5m   Component Model Q'ty Remarks DSC Terminal NCT-196 1   DSC Power Cable 7ZCJD0062 1 L=3m DSC AF Cable 7ZCJD0071 1 L=1.5m DSC Control Cable 7ZCJD0072 1 L=1.5m Spare fuse 5ZFEX00012 2 3A Bridge Card 7ZPJD0122 1 English Instruction Manual 7ZPJD0120 1 English ♦ JRC JSB-196GM MF/HF Radiotelephone OPTIONS Component Model Q'ty Remarks DC-DC Converter NBG-300 1 input24VDC Hand microphone NVT-140 1 Curl cable(L=0.5m) Hand microphone NVT-133 1 Straight cable(L=5m)