Intended for 80 - 400 amp hour capacity
batteries, the NewMar PT-40 Battery Charger, Phase Three Series, 12 Volt DC boosts the
reliability and safety of your vessel via the use of redundant, independent charger
modules. Each power module works independently of the others, so if one breaks down,
you don't lose power - simply swap out the faulty module while the other modules remain
operational.
Contact
us
today for a free consultation!
...
[Show More]
Specifications
Recommended Battery Type: Gel-Cell, Flooded or
Sealed Lead-Acid;
Input Voltage/Frequency: 90 - 264 VAC, 47-63 Hz.
Derate linearly
from 100% output @ 105 VAC to 80% output @ 90 VAC
Efficiency: 85% typical
Output Battery Banks: 3
Module Bays: 3
Power Factor: .96-.99
Weight with Modules Installed: 34 lbs/15.5
kg.
Related Material
NewMar PT-40 Battery
Charger Brochure
NewMar Phase Three
Battery Charger ABS Certification
NewMar Online Catalog
The PT-40 Battery Charger System can be serviced with no prior specialized training,
eliminating the need for technical personnel just for this task. In the event of a
module malfunction, the faulty module is easily replaced without any wires to fiddle
with. You won't even need to remove the battery case to make the swap!
Serviceability
No technical training needed.
Swap faulty modules in moments.
Remaining modules stay operational throughout.
System status indicators and diagnostics.
Universal input.
Rapid recharge.
NewMar PT-40 Features
Rapid charging with "smart" three phase charging system.
Battery type selector switch: gel-cell, lead-acid, AGM
Temperature compensated output (option)
Diagnostic and system indicators
Universal input of 90-264 VAC, 50-60 Hz.
Powder coated stainless steel case
Contact
us
today for a free consultation!NewMar PT-40 Battery
Charger BrochureNewMar Phase Three
Battery Charger ABS CertificationNewMar Online Catalog
