The NewMar PT-80 Battery Charger, Phase Three
Series, 12 Volt DC is intended for 140 to 700 amp hour capacity batteries and increases
reliability through the use of redundant, independent charger modules. If one power
module breaks down, you won't automatically lose power to your vessel - since each
module operates independently, the others will remain operational while you replace the
faulty one.
Contact
us
today for a free consultation!
...
[Show More]
Specifications
Recommended Battery Type: Gel-Cell, Flooded or
Sealed Lead-Acid;
Input Voltage/Frequency: 90 - 264 VAC, 47-63 Hz.
Derate linearly
from 100% output @ 105 VAC to 80% output @ 90 VAC
Efficiency: 85% typical
6 Cell, 80-400 A-H (per installed module); 240-
1200 A-H (per system)
Module Bays: 3
Power Factor: .96-.99
Weight with Modules Installed: 34 lbs/15.5
kg.
Related Material
NewMar PT-80 Battery
Charger Brochure
NewMar Phase Three
Battery Charger ABS Certification
NewMar Online Catalog
The PT-80 Battery Charger System is safe and easy to use, with no wiring involved in
replacing faulty power modules, and no special technical knowledge required, either.
Simply replace the malfunctioning power module with an on hand spare or one requested
from the factory and you're done.
Serviceability
Change faulty modules in minutes.
Remaining modules stay functional, no down time.
System status indicators and diagnostics.
Universal input.
No technical training required.
NewMar PT-80 Features
Rapid charge with "smart" three phase charging design.
Battery type switch: gel-cell, lead-acid, AGM
Temperature compensated output (option)
Diagnostic and system indicators
Universal input of 90-264 VAC, 50-60 Hz.
Powder coated stainless steel case
Contact
us
today for a free consultation!NewMar PT-80 Battery
Charger BrochureNewMar Phase Three
Battery Charger ABS CertificationNewMar Online Catalog
