The NewMar PTM-24-22 Charger System Module is
a power module designed for NewMar's Phase Three Modular (PTM) concept. The system is
considered "fault tolerant" due to its independent, redundant power module set-up -
should one module malfunction, the others will still keep operating as usual, while you
make the necessary module swap. The PTM-24-22 fits into a wall-mounted rack that
provides space for two more modules, as well as all of the necessary diagnostic and...
[Show More]
system status indicators and the "smart" controller circuit that helps provide rapid,
three stage charging.
Contact
us
today for a free consultation!
Specifications
Input Current: 3 amps @ 230VAC; 6 amps @ 115
VAC
Input Voltage/Frequency: 90 - 264 VAC, 47-63 Hz.
Derate linearly
from 100% output @ 105 VAC to 80% output @ 90 VAC
Efficiency: 85% typical
Protection Features: Input Fuse, Output Fuse,
Current Limiting, Over Voltage Protection, Cooling Fan, Automatic Thermal
Shutdown/Recovery
Status Indicators: Output OK/FAULT
Power Factor: .96-.99
6 lbs.
Related Material
NewMar PTM-24-22 Brochure
NewMar Phase Three
Battery Charger ABS Certification
NewMar Online Catalog
Down time is costly and inconvenient, but unfortunately equipment failures can happen
any time. The PTM-24-22 Charger System Module is designed to counteract that and boost
reliability by reducing the impact a single point of failure has on the system as a
whole.
Serviceability
No inconvenient power interruptions.
Faulty modules can be changed in minutes.
Remaining modules stay functional.
Universal input.
No technical training required.
NewMar PTM-24-22 Features
"Smart" three phase charging design for rapid charging.
Battery selector switch: gel-cell, lead-acid, AGM
Temperature compensated output (option)
Diagnostic and system indicators
Universal input of 90-264 VAC, 50-60 Hz.
Powder coated stainless steel case
Contact
us
today for a free consultation!NewMar PTM-24-22 BrochureNewMar Phase Three
Battery Charger ABS CertificationNewMar Online Catalog
