Raymarine GPM400 G-Series Processor Module-Australia/NZ Charts
Manufacturer p/n: E02048
The GPM400 G-Series Processor Module is the core of Raymarine’s premier navigation system. With a super fast processor, high performance graphics hardware and a built-in high capacity hard drive the GPM400 is up to 10 times faster than other embedded marine navigation systems. The GPM400’s rugged aluminum housing is shock resistant and designed with heat dissipating fins for cool, quiet, trouble-free operation under any conditions.
The GPM400 comes preloaded with the entire Navionics Platinum chart library for the USA, Canada and Caribbean Sea including full 2D mapping, 3D bathymetric charts, aerial photos, panoramic port photos, cruising guide, animated tides and currents, points-of-interest and more. Should your travels take you beyond the built-in cartography the GPM400 is also equipped with a Compact Flash card reader for accessing plug-in map cards.
GPM400’s integrated SeaTalkhs networking port provides access to features like SIRIUS Satellite Radio and Marine Weather Service (SR100 receiver, sold separately), 8 channels of networked video for surveillance and entertainment (GVM400 video servers, sold separately), as well as for passing navigation data, radar, cartography, fish finder, video and audio between GPM400’s on multi-station networks.
GPM400 features a high performance video output with dual DVI outputs for connection to your G-Series Ultra Bright Marine Displays or onboard HDTV monitor. GPM400 is also fitted with standard SeaTalk, SeaTalkNG/ NMEA2000 and dual NMEA 0183 ports for connection to compatible instruments, autopilots, AIS receivers, sensors, electronic engine systems and more.
Features:
GPM400: Power and Performance
- Rugged, waterproof construction engineered for the marine environment.
- The centeral intelligence core of every G-Series network.
- 10 times faster than previous generation Raymarine navigation devices.
- Powerful processor for blazing speed and performance.
- SeaTalkhs integration supports multiple GPM400 processors.
- Two DVI/VGA video output ports.
- Built-in shock resistant hard-drive, pre-loaded with ready-to-go Navionics Platinum charts (no unlock codes required.)
- 3000 waypoints/45,000 trackpoints with 15 independent track memories.
- Connections for SeaTalkNG, SeaTalkHS, SeaTalk, NMEA2000, NMEA 0183.
GPM400 G-Series Processor Module (Australia, NZ) Specifications
| Power |
| | Nominal voltage (volts DC) | 12V and 24V systems | |
| | Operating voltage (volts DC) | 10.7 – 32V | |
| | Power consumption (no external loads) | 3A at 12V, 1.5A at 24V | |
| | Power consumption (external loads) | 5A at 12V, 2.5A at 24V | |
| | SeaTalk/alarm power output | 250mA at 12V | |
| Physical |
| | Overall dimensions (WxHxD) mm | 335x230x125 | |
| | Product weight kg (lbs) | 6.5 (14.3) | |
| Connections |
| | Data | NMEA 0183 (x2), SeaTalk, SeaTalkng, SeaTalkhs, Compact Flash, USB (software upgrade only) | |
| | Video | DVI (x2) (optional VGA adaptor available) | |
| | Audio | stereo line out (rated 1V RMS) | |
| Environmental |
| | Operating temperature range | -15°C to +55°C | |
| | Non-operating temperature range | -25°C to +75°C | |
| | Humidity | up to 80% | |
| | Waterproofing standard | drip resistant | |
| | Warranty | 2 years parts and 2 years labor | |
| Approvals |
| | CE | 89/336EEC as amended by 92/31/EEC. EN60945: 2002 |
Raymarine GPM400 G-Series Processor Module-Australia/NZ Charts Manufacturer p/n: E02048 The GPM400 G-Series Processor Module is the core of Raymarine’s premier navigation system. With a super fast processor, high performance graphics hardware and a built-in high capacity hard drive the GPM400 is up to 10 times faster than other embedded marine navigation systems. The GPM400’s rugged aluminum housing is shock resistant and designed with heat dissipating fins for cool, quiet,...
[Show More]
trouble-free operation under any conditions. The GPM400 comes preloaded with the entire Navionics Platinum chart library for the USA, Canada and Caribbean Sea including full 2D mapping, 3D bathymetric charts, aerial photos, panoramic port photos, cruising guide, animated tides and currents, points-of-interest and more. Should your travels take you beyond the built-in cartography the GPM400 is also equipped with a Compact Flash card reader for accessing plug-in map cards. GPM400’s integrated SeaTalkhs networking port provides access to features like SIRIUS Satellite Radio and Marine Weather Service (SR100 receiver, sold separately), 8 channels of networked video for surveillance and entertainment (GVM400 video servers, sold separately), as well as for passing navigation data, radar, cartography, fish finder, video and audio between GPM400’s on multi-station networks. GPM400 features a high performance video output with dual DVI outputs for connection to your G-Series Ultra Bright Marine Displays or onboard HDTV monitor. GPM400 is also fitted with standard SeaTalk, SeaTalkNG/ NMEA2000 and dual NMEA 0183 ports for connection to compatible instruments, autopilots, AIS receivers, sensors, electronic engine systems and more. Features: GPM400: Power and Performance Rugged, waterproof construction engineered for the marine environment. The centeral intelligence core of every G-Series network. 10 times faster than previous generation Raymarine navigation devices. Powerful processor for blazing speed and performance. SeaTalkhs integration supports multiple GPM400 processors. Two DVI/VGA video output ports. Built-in shock resistant hard-drive, pre-loaded with ready-to-go Navionics Platinum charts (no unlock codes required.) 3000 waypoints/45,000 trackpoints with 15 independent track memories. Connections for SeaTalk NG , SeaTalk HS , SeaTalk, NMEA2000, NMEA 0183. GPM400 G-Series Processor Module (Australia, NZ) Specifications Power Nominal voltage (volts DC) 12V and 24V systems Operating voltage (volts DC) 10.7 – 32V Power consumption (no external loads) 3A at 12V, 1.5A at 24V Power consumption (external loads) 5A at 12V, 2.5A at 24V SeaTalk/alarm power output 250mA at 12V Physical Overall dimensions (WxHxD) mm 335x230x125 Product weight kg (lbs) 6.5 (14.3) Connections Data NMEA 0183 (x2), SeaTalk, SeaTalkng, SeaTalkhs, Compact Flash, USB (software upgrade only) Video DVI (x2) (optional VGA adaptor available) Audio stereo line out (rated 1V RMS) Environmental Operating temperature range -15°C to +55°C Non-operating temperature range -25°C to +75°C Humidity up to 80% Waterproofing standard drip resistant Warranty 2 years parts and 2 years labor Approvals CE 89/336EEC as amended by 92/31/EEC. EN60945: 2002
